Hardware
Version vom 10. September 2020, 21:55 Uhr von Damadmai (Diskussion | Beiträge) (add link to komponenten)
Siehe auch Komponenten
Beispiel-Setups sind unter Use Cases zu finden.
| Name | Hersteller | Outdoor | v642 | Ethernet Ports | WLAN Band | WLAN Standard | Antenne | Gewinn | USB Ports |
|---|---|---|---|---|---|---|---|---|---|
| AirFiber 60 Long Range | Ubiquiti | ja | 1 | 60 GHz | ja | ||||
| BPI-R3 | BananaPi | nein | ja | 5 | nein | ||||
| Cube 60Pro ac | MikroTik | ja | 1 | 5 GHz, 60 GHz | 802.11ay | ja | |||
| EdgeRouter X | Ubiquiti | nein | ja | 5 | nein | ||||
| EdgeRouter X-SFP | Ubiquiti | nein | ja | 5 | nein | ||||
| IsoStation AC / IS-5AC | Ubiquiti | ja | 1 | 2.4 GHz, 5 GHz | 802.11ac | ja | 14 dBi | ||
| LHG 60G | MikroTik | ja | 1 | 60 GHz | 802.11ad | ja | |||
| PowerBeam M5-400 | Ubiquiti | ja | 1 | 5 GHz | 802.11an | ja | 25dBi | ||
| Routerboard RB5009UPr | MikroTik | nein | ja | 8 | nein | ||||
| Raspberry Pi 3B+ | Raspberry Pi Foundation | nein | 1 | 2.4 GHz, 5 GHz | 802.11gn | nein |
Neuen Router eintragen:
| page | Picture | name | manufacturer | ethernetports | wifi | wifiband | antenna | wifistandard | outdoor | usbports |
|---|---|---|---|---|---|---|---|---|---|---|
| BananaPi BPI-R3 | Bpi-r3.webp | BPI-R3 | BananaPi | 5 | wahr | nein | nein | |||
| RB5009UPr |  | Routerboard RB5009UPr | MikroTik | 8 | falsch | nein | nein | |||
| Raspberry Pi 3B+ |  | Raspberry Pi 3B+ | Raspberry Pi Foundation | 1 | wahr | 2.4 GHz, 5 GHz | nein | 802.11gn | nein | |
| EdgeRouter X |  | EdgeRouter X | Ubiquiti | 5 | falsch | nein | nein | |||
| EdgeRouter X-SFP |  | EdgeRouter X-SFP | Ubiquiti | 5 | falsch | nein | nein |
