Hardware/Antenne/Cube 60Pro ac: Unterschied zwischen den Versionen
< Hardware
Zur Navigation springen
Zur Suche springen
(Info zu benötigtem Werkzeug) |
(Beispielkonfiguration hinzugefügt) |
||
| Zeile 22: | Zeile 22: | ||
Als Werkzeug für die Montage ist eine Stecknuss mit 7 mm Innensechskant sowie | Als Werkzeug für die Montage ist eine Stecknuss mit 7 mm Innensechskant sowie | ||
ein 6mm Winkelschlüssel notwendig. | ein 6mm Winkelschlüssel notwendig. | ||
= Beispielkonfiguration = | |||
Access Point: | |||
/interface bridge add name=bridge | |||
/interface w60g set [ find ] disabled=no frequency=62640 mode=bridge name=wlan60-1 password=... put-stations-in-bridge=bridge ssid=node1n.funkfeuer.at | |||
/interface vlan add interface=ether1 name=vlan1100 vlan-id=1100 | |||
/interface bridge port add bridge=bridge interface=ether1 | |||
/ip address add address=10.12.34.49/24 interface=vlan1100 network=10.12.34.0 | |||
/ip cloud set update-time=no | |||
/ip route add disabled=no dst-address=0.0.0.0/0 gateway=10.12.34.100 | |||
/ip service set telnet disabled=yes | |||
/ip service set ftp disabled=yes | |||
/ip service set api disabled=yes | |||
/ip service set api-ssl disabled=yes | |||
/system clock set time-zone-name=Europe/Vienna | |||
/system identity set name=node1-n60 | |||
/system routerboard settings set auto-upgrade=yes | |||
Station: | |||
/interface bridge add name=bridge | |||
/interface w60g set [ find ] disabled=no mode=station-bridge name=wlan60-1 password=... ssid=node1n.funkfeuer.at | |||
/interface vlan add interface=ether1 name=vlan1100 vlan-id=1100 | |||
/interface bridge port add bridge=bridge interface=ether1 | |||
/interface bridge port add bridge=bridge interface=wlan60-1 | |||
/ip address add address=10.12.35.57/24 interface=vlan1100 network=10.12.35.0 | |||
/ip cloud set update-time=no | |||
/ip route add disabled=no dst-address=0.0.0.0/0 gateway=10.12.35.100 | |||
/ip service set telnet disabled=yes | |||
/ip service set ftp disabled=yes | |||
/ip service set api disabled=yes | |||
/ip service set api-ssl disabled=yes | |||
/system clock set time-zone-name=Europe/Vienna | |||
/system identity set name=node2-s60 | |||
/system routerboard settings set auto-upgrade=yes | |||
Aktuelle Version vom 30. Dezember 2024, 11:37 Uhr
| MikroTik Cube 60Pro ac | |
|---|---|
| |
| Name |
Cube 60Pro ac |
| Hersteller |
MikroTik |
| Veraltet |
Nein |
| Outdoor |
Ja |
| Antenne |
Ja |
| System | |
| PoE |
passiv |
| Netzwerk | |
| LAN-Ports |
1 |
| Switch |
Nein |
| WLAN |
Ja |
| WLAN Band |
5 GHz, 60 GHz |
| WLAN Standard |
802.11ay |
| Antennenanschluss |
intern |
| Firmware | |
| Firmware |
RouterOS |
| Flashmethode |
Web
|
| Antenne | |
| Antennentyp |
Panel |
| Antennengewinn | |
| Polarisation |
|
https://mikrotik.com/product/cube_60pro_ac
Als Werkzeug für die Montage ist eine Stecknuss mit 7 mm Innensechskant sowie ein 6mm Winkelschlüssel notwendig.
Beispielkonfiguration
Access Point:
/interface bridge add name=bridge /interface w60g set [ find ] disabled=no frequency=62640 mode=bridge name=wlan60-1 password=... put-stations-in-bridge=bridge ssid=node1n.funkfeuer.at /interface vlan add interface=ether1 name=vlan1100 vlan-id=1100 /interface bridge port add bridge=bridge interface=ether1 /ip address add address=10.12.34.49/24 interface=vlan1100 network=10.12.34.0 /ip cloud set update-time=no /ip route add disabled=no dst-address=0.0.0.0/0 gateway=10.12.34.100 /ip service set telnet disabled=yes /ip service set ftp disabled=yes /ip service set api disabled=yes /ip service set api-ssl disabled=yes /system clock set time-zone-name=Europe/Vienna /system identity set name=node1-n60 /system routerboard settings set auto-upgrade=yes
Station:
/interface bridge add name=bridge /interface w60g set [ find ] disabled=no mode=station-bridge name=wlan60-1 password=... ssid=node1n.funkfeuer.at /interface vlan add interface=ether1 name=vlan1100 vlan-id=1100 /interface bridge port add bridge=bridge interface=ether1 /interface bridge port add bridge=bridge interface=wlan60-1 /ip address add address=10.12.35.57/24 interface=vlan1100 network=10.12.35.0 /ip cloud set update-time=no /ip route add disabled=no dst-address=0.0.0.0/0 gateway=10.12.35.100 /ip service set telnet disabled=yes /ip service set ftp disabled=yes /ip service set api disabled=yes /ip service set api-ssl disabled=yes /system clock set time-zone-name=Europe/Vienna /system identity set name=node2-s60 /system routerboard settings set auto-upgrade=yes