Hardware/Raspberry Pi 3B+: Unterschied zwischen den Versionen
< Hardware
Zur Navigation springen
Zur Suche springen
(Link zur Konfiguration) |
|||
Zeile 15: | Zeile 15: | ||
|mimostreams=1x1 | |mimostreams=1x1 | ||
|antennaconnector=U.FL | |antennaconnector=U.FL | ||
|firmware=Raspbian, OpenWRT | |||
|flashmethod=TFTP-Client, BOOTP, Speicherkarte | |flashmethod=TFTP-Client, BOOTP, Speicherkarte | ||
|flashguide=https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/net_tutorial.md | |flashguide=https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/net_tutorial.md | ||
Zeile 21: | Zeile 22: | ||
}} | }} | ||
Konfiguration wie hier nur ohne OpenVPN: [[OpenVPN_mit_Debian/Ubuntu]] | Konfiguration unter Raspbian wie hier nur ohne OpenVPN: [[OpenVPN_mit_Debian/Ubuntu]] |
Version vom 5. Oktober 2018, 08:22 Uhr
Raspberry Pi Foundation Raspberry Pi 3B+ | |
---|---|
Name |
Raspberry Pi 3B+ |
Hersteller |
Raspberry Pi Foundation |
Veraltet |
Nein |
Outdoor |
Nein |
Antenne |
Nein |
System | |
CPU |
BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz |
RAM |
1GB |
Flash |
SD-Karte |
PoE |
802.3af |
Netzwerk | |
LAN-Ports |
1 |
Switch |
Nein |
WLAN |
Ja |
WLAN Band |
2.4 GHz, 5 GHz |
WLAN Standard |
802.11gn |
MIMO Streams |
1x1 |
Antennenanschluss |
U.FL |
Firmware | |
Firmware |
Raspbian, OpenWRT |
Flashmethode |
TFTP-Client, BOOTP, Speicherkarte |
Flashanleitung |
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/net_tutorial.md |
Konfiguration |
Konfiguration unter Raspbian wie hier nur ohne OpenVPN: OpenVPN_mit_Debian/Ubuntu